As people who have owned horses for years, we here at Haylett's North Country understand how manually cranking a trailer can be a pain in the back--literally! That is why we keep electric and hydraulic horse, cargo, and utility trailer jacks on hand by Equalizer Systems, the industry leader since 1990!

Equalizer Systems, a division of Days Corporation, was established in 1990. They currently operate from 100,000 square feet of manufacturing space located in Elkhart, IN. Over the past few years Equalizer Systems has experienced substantial growth due to the introduction of products such as AUTO-LEVEL and the AM24F. We are committed to providing our customers with a quality product at an exceptional value and continuing support after the sale. Everyone on the Equalizer Systems staff takes great pride in our ability to provide the level of service that our customers have come to expect.

This is the all-new unit designed for the Bulldog single speed and two speed jacks, as well as the Fulton single speed and Ram single speed jackleg. The El-Pac 1 is capable of lifting 5,000 lbs. of jack weight and is used on living quarter trailers up to 28' on the floor. This system lifts 8 inches per minute under full load.

This is the all-new unit designed for the Binkley two-speed jack where mounting space is limited. Requires 5 inches of width clearance to mount. Capable of lifting 6,500 lbs. of jack weight, and used on living quarter trailers up to 32' on the floor. This system lifts 8 inches per minute under full load.

This is the most popular unit that we sell. This self-contained/ready to install jack provides 20, 24 or 30 inches of stroke, has a swivel footpad, and lifts 12,000 lbs. The AM series is available in a variety of mounting configurations.

These systems have a lifting capacity of 4500 Lbs. The jack assemblies are manufactured with a 3" x 3" outer tube and are available in 24" stroke length. The pump is attached to the jack and has a steel cover included. These should be used on trailers that have a 8' short wall or smaller.    

These systems have a lifting capacity of 7000 Lbs. The jack assemblies are manufactured with a 3 1/2" x 3 1/2" outer tube and are available in 24" stroke length. The pump is attached to the jack and has a steel cover included. These should be used on trailers that have a 11' short wall or smaller.

This unit is available for bumper pull & towable trailers with a lifting capacity of 6,000 lbs. This unit is an easy installation for tongue jack applications.

With two 20, 24 or 30 inch jacks this set up has a total capacity of 24,000 lbs. One control box with dual switches gives the ability of operating each jack independently for uneven ground conditions. Pump style is either a horizontal or vertical mount and can be mounted on the jack with an optional pump cover.

This system is comprised of two of the 3"x 3" jacks with 24" of stroke. A single switch operates the legs in tandem. The system has an overall lifting capacity of 9000 Lbs.

Since its' introduction, Auto-Level has quickly become the premium choice in leveling systems. The automatic, one touch operation levels a truck/trailer in less than two minutes operating each jack independently in a patented sequential process. Sequential leveling provides a more precise level state throughout the length of the truck/trailer.

Utilizing four two-way hydraulic cylinders, Auto-Level has the ability to extend and retract the jacks during the leveling sequence. This patented process results in added stability of the truck/trailer by not lifting the unit off the tires. The automatic All Retract feature makes stowing the jacks for travel fast and simple.

Return to our

Parts Department